|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|
|
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | DIAGNOSTICS | SEE ALSO | AUTHOR | ACKNOWLEDGEMENTS | COLOPHON |
|
|
|
LDAPEXOP(1) General Commands Manual LDAPEXOP(1)
ldapexop - issue LDAP extended operations
ldapexop [-V[V]] [-d debuglevel] [-n] [-v] [-f file] [-x]
[-D binddn] [-W] [-w passwd] [-y passwdfile] [-H URI]
[-e [!]ext[=extparam]] [-o opt[=optparam]] [-O security-
properties] [-I] [-Q] [-N] [-U authcid] [-R realm] [-X authzid]
[-Y mech] [-Z[Z]] {oid | oid:data | oid::b64data | whoami |
cancel cancel-id | refresh DN [ttl]}
ldapexop issues the LDAP extended operation specified by oid or
one of the special keywords whoami, cancel, or refresh.
Additional data for the extended operation can be passed to the
server using data or base-64 encoded as b64data in the case of
oid, or using the additional parameters in the case of the
specially named extended operations above.
Please note that ldapexop behaves differently for the same
extended operation when it was given as an OID or as a specially
named operation:
Calling ldapexop with the OID of the whoami (RFC 4532) extended
operation
ldapexop [<options>] 1.3.6.1.4.1.4203.1.11.3
yields
# extended operation response
data:: <base64 encoded response data>
while calling it with the keyword whoami
ldapexop [<options>] whoami
results in
dn:<client's identity>
-V[V] Print version info. If-VV is given, only the version
information is printed.
-d debuglevel
Set the LDAP debugging level to debuglevel.
-n Show what would be done but don't actually do it. Useful
for debugging in conjunction with -v.
-v Run in verbose mode, with many diagnostics written to
standard output.
-f file
Read operations from file.
-x Use simple authentication instead of SASL.
-D binddn
Use the Distinguished Name binddn to bind to the LDAP
directory.
-W Prompt for simple authentication. This is used instead of
specifying the password on the command line.
-w passwd
Use passwd as the password for simple authentication.
-y passwdfile
Use complete contents of passwdfile as the password for
simple authentication.
-H URI Specify URI(s) referring to the ldap server(s); only the
protocol/host/port fields are allowed; a list of URI,
separated by whitespace or commas is expected.
-e [!]ext[=extparam]
Specify general extensions. ´!´ indicates criticality.
[!]assert=<filter> (an RFC 4515 Filter)
!authzid=<authzid> ("dn:<dn>" or "u:<user>")
[!]bauthzid (RFC 3829 authzid control)
[!]chaining[=<resolve>[/<cont>]]
[!]manageDSAit
[!]noop
ppolicy
[!]postread[=<attrs>] (a comma-separated attribute list)
[!]preread[=<attrs>] (a comma-separated attribute list)
[!]relax
sessiontracking[=<username>]
abandon,cancel,ignore (SIGINT sends abandon/cancel,
or ignores response; if critical, doesn't wait for SIGINT.
not really controls)
-o opt[=optparam]
Specify any ldap.conf(5) option or one of the following:
nettimeout=<timeout> (in seconds, or "none" or "max")
ldif_wrap=<width> (in columns, or "no" for no wrapping)
-O security-properties
Specify SASL security properties.
-I Enable SASL Interactive mode. Always prompt. Default is
to prompt only as needed.
-Q Enable SASL Quiet mode. Never prompt.
-N Do not use reverse DNS to canonicalize SASL host name.
-U authcid
Specify the authentication ID for SASL bind. The form of
the ID depends on the actual SASL mechanism used.
-R realm
Specify the realm of authentication ID for SASL bind. The
form of the realm depends on the actual SASL mechanism
used.
-X authzid
Specify the requested authorization ID for SASL bind.
authzid must be one of the following formats:
dn:<distinguished name> or u:<username>
-Y mech
Specify the SASL mechanism to be used for authentication.
Without this option, the program will choose the best
mechanism the server knows.
-Z[Z] Issue StartTLS (Transport Layer Security) extended
operation. Giving it twice (-ZZ) will require the
operation to be successful.
Exit status is zero if no errors occur. Errors result in a non-
zero exit status and a diagnostic message being written to
standard error.
ldap_extended_operation_s(3)
This manual page was written by Peter Marschall based on
ldapexop's usage message and a few tests with ldapexop. Do not
expect it to be complete or absolutely correct.
OpenLDAP Software is developed and maintained by The OpenLDAP
Project <http://www.openldap.org/>. OpenLDAP Software is derived
from the University of Michigan LDAP 3.3 Release.
This page is part of the OpenLDAP (an open source implementation
of the Lightweight Directory Access Protocol) project.
Information about the project can be found at
⟨http://www.openldap.org/⟩. If you have a bug report for this
manual page, see ⟨http://www.openldap.org/its/⟩. This page was
obtained from the project's upstream Git repository
⟨https://git.openldap.org/openldap/openldap.git⟩ on 2024-06-14.
(At that time, the date of the most recent commit that was found
in the repository was 2024-06-13.) If you discover any rendering
problems in this HTML version of the page, or you believe there
is a better or more up-to-date source for the page, or you have
corrections or improvements to the information in this COLOPHON
(which is not part of the original manual page), send a mail to
man-pages@man7.org
LDAPEXOP(1)
|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|