MAN(1) Manual pager utils MAN(1)
man - an interface to the system reference manuals
man [man options] [[section] page ...] ... man -k [apropos options] regexp ... man -K [man options] [section] term ... man -f [whatis options] page ... man -l [man options] file ... man -w|-W [man options] page ...
man is the system's manual pager. Each page argument given to man is normally the name of a program, utility or function. The manual page associated with each of these arguments is then found and displayed. A section, if provided, will direct man to look only in that section of the manual. The default action is to search in all of the available sections following a pre-defined order (see DEFAULTS), and to show only the first page found, even if page exists in several sections. The table below shows the section numbers of the manual followed by the types of pages they contain. 1 Executable programs or shell commands 2 System calls (functions provided by the kernel) 3 Library calls (functions within program libraries) 4 Special files (usually found in /dev) 5 File formats and conventions, e.g. /etc/passwd 6 Games 7 Miscellaneous (including macro packages and conventions), e.g. man(7), groff(7) 8 System administration commands (usually only for root) 9 Kernel routines [Non standard] A manual page consists of several sections. Conventional section names include NAME, SYNOPSIS, CONFIGURATION, DESCRIPTION, OPTIONS, EXIT STATUS, RETURN VALUE, ERRORS, ENVIRONMENT, FILES, VERSIONS, CONFORMING TO, NOTES, BUGS, EXAMPLE, AUTHORS, and SEE ALSO. The following conventions apply to the SYNOPSIS section and can be used as a guide in other sections. bold text type exactly as shown. italic text replace with appropriate argument. [-abc] any or all arguments within [ ] are optional. -a|-b options delimited by | cannot be used together. argument ... argument is repeatable. [expression] ... entire expression within [ ] is repeatable. Exact rendering may vary depending on the output device. For instance, man will usually not be able to render italics when running in a terminal, and will typically use underlined or coloured text instead. The command or function illustration is a pattern that should match all possible invocations. In some cases it is advisable to illustrate several exclusive invocations as is shown in the SYNOPSIS section of this manual page.
man ls Display the manual page for the item (program) ls. man man.7 Display the manual page for macro package man from section 7. (This is an alternative spelling of "man 7 man".) man 'man(7)' Display the manual page for macro package man from section 7. (This is another alternative spelling of "man 7 man". It may be more convenient when copying and pasting cross-references to manual pages. Note that the parentheses must normally be quoted to protect them from the shell.) man -a intro Display, in succession, all of the available intro manual pages contained within the manual. It is possible to quit between successive displays or skip any of them. man -t bash | lpr -Pps Format the manual page for bash into the default troff or groff format and pipe it to the printer named ps. The default output for groff is usually PostScript. man --help should advise as to which processor is bound to the -t option. man -l -Tdvi ./foo.1x.gz > ./foo.1x.dvi This command will decompress and format the nroff source manual page ./foo.1x.gz into a device independent (dvi) file. The redirection is necessary as the -T flag causes output to be directed to stdout with no pager. The output could be viewed with a program such as xdvi or further processed into PostScript using a program such as dvips. man -k printf Search the short descriptions and manual page names for the keyword printf as regular expression. Print out any matches. Equivalent to apropos printf. man -f smail Lookup the manual pages referenced by smail and print out the short descriptions of any found. Equivalent to whatis smail.
Many options are available to man in order to give as much flexibility as possible to the user. Changes can be made to the search path, section order, output processor, and other behaviours and operations detailed below. If set, various environment variables are interrogated to determine the operation of man. It is possible to set the "catch-all" variable $MANOPT to any string in command line format, with the exception that any spaces used as part of an option's argument must be escaped (preceded by a backslash). man will parse $MANOPT prior to parsing its own command line. Those options requiring an argument will be overridden by the same options found on the command line. To reset all of the options set in $MANOPT, -D can be specified as the initial command line option. This will allow man to "forget" about the options specified in $MANOPT, although they must still have been valid. Manual pages are normally stored in nroff(1) format under a directory such as /usr/share/man. In some installations, there may also be preformatted cat pages to improve performance. See manpath(5) for details of where these files are stored. This package supports manual pages in multiple languages, controlled by your locale. If your system did not set this up for you automatically, then you may need to set $LC_MESSAGES, $LANG, or another system-dependent environment variable to indicate your preferred locale, usually specified in the POSIX format: <language>[_<territory>[.<character-set>[,<version>]]] If the desired page is available in your locale, it will be displayed in lieu of the standard (usually American English) page. If you find that the translations supplied with this package are not available in your native language and you would like to supply them, please contact the maintainer who will be coordinating such activity. Individual manual pages are normally written and maintained by the maintainers of the program, function, or other topic that they document, and are not included with this package. If you find that a manual page is missing or inadequate, please report that to the maintainers of the package in question. For information regarding other features and extensions available with this manual pager, please read the documents supplied with the package.
The order of sections to search may be overridden by the environment variable $MANSECT or by the SECTION directive in /usr/local/etc/man_db.conf. By default it is as follows: 1 n l 8 3 0 2 5 4 9 6 7 The formatted manual page is displayed using a pager. This can be specified in a number of ways, or else will fall back to a default (see option -P for details). The filters are deciphered by a number of means. Firstly, the command line option -p or the environment variable $MANROFFSEQ is interrogated. If -p was not used and the environment variable was not set, the initial line of the nroff file is parsed for a preprocessor string. To contain a valid preprocessor string, the first line must resemble '\" <string> where string can be any combination of letters described by option -p below. If none of the above methods provide any filter information, a default set is used. A formatting pipeline is formed from the filters and the primary formatter (nroff or [tg]roff with -t) and executed. Alternatively, if an executable program mandb_nfmt (or mandb_tfmt with -t) exists in the man tree root, it is executed instead. It gets passed the manual source file, the preprocessor string, and optionally the device specified with -T or -E as arguments.
Non-argument options that are duplicated either on the command line, in $MANOPT, or both, are not harmful. For options that require an argument, each duplication will override the previous argument value. General options -C file, --config-file=file Use this user configuration file rather than the default of ~/.manpath. -d, --debug Print debugging information. -D, --default This option is normally issued as the very first option and resets man's behaviour to its default. Its use is to reset those options that may have been set in $MANOPT. Any options that follow -D will have their usual effect. --warnings[=warnings] Enable warnings from groff. This may be used to perform sanity checks on the source text of manual pages. warnings is a comma-separated list of warning names; if it is not supplied, the default is "mac". See the “Warnings” node in info groff for a list of available warning names. Main modes of operation -f, --whatis Equivalent to whatis. Display a short description from the manual page, if available. See whatis(1) for details. -k, --apropos Equivalent to apropos. Search the short manual page descriptions for keywords and display any matches. See apropos(1) for details. -K, --global-apropos Search for text in all manual pages. This is a brute- force search, and is likely to take some time; if you can, you should specify a section to reduce the number of pages that need to be searched. Search terms may be simple strings (the default), or regular expressions if the --regex option is used. Note that this searches the sources of the manual pages, not the rendered text, and so may include false positives due to things like comments in source files. Searching the rendered text would be much slower. -l, --local-file Activate "local" mode. Format and display local manual files instead of searching through the system's manual collection. Each manual page argument will be interpreted as an nroff source file in the correct format. No cat file is produced. If '-' is listed as one of the arguments, input will be taken from stdin. When this option is not used, and man fails to find the page required, before displaying the error message, it attempts to act as if this option was supplied, using the name as a filename and looking for an exact match. -w, --where, --path, --location Don't actually display the manual page, but do print the location of the source nroff file that would be formatted. If the -a option is also used, then print the locations of all source files that match the search criteria. -W, --where-cat, --location-cat Don't actually display the manual page, but do print the location of the preformatted cat file that would be displayed. If the -a option is also used, then print the locations of all preformatted cat files that match the search criteria. If -w and -W are both used, then print both source file and cat file separated by a space. If all of -w, -W, and -a are used, then do this for each possible match. -c, --catman This option is not for general use and should only be used by the catman program. -R encoding, --recode=encoding Instead of formatting the manual page in the usual way, output its source converted to the specified encoding. If you already know the encoding of the source file, you can also use manconv(1) directly. However, this option allows you to convert several manual pages to a single encoding without having to explicitly state the encoding of each, provided that they were already installed in a structure similar to a manual page hierarchy. Consider using man-recode(1) instead for converting multiple manual pages, since it has an interface designed for bulk conversion and so can be much faster. Finding manual pages -L locale, --locale=locale man will normally determine your current locale by a call to the C function setlocale(3) which interrogates various environment variables, possibly including $LC_MESSAGES and $LANG. To temporarily override the determined value, use this option to supply a locale string directly to man. Note that it will not take effect until the search for pages actually begins. Output such as the help message will always be displayed in the initially determined locale. -m system[,...], --systems=system[,...] If this system has access to other operating system's manual pages, they can be accessed using this option. To search for a manual page from NewOS's manual page collection, use the option -m NewOS. The system specified can be a combination of comma delimited operating system names. To include a search of the native operating system's manual pages, include the system name man in the argument string. This option will override the $SYSTEM environment variable. -M path, --manpath=path Specify an alternate manpath to use. By default, man uses manpath derived code to determine the path to search. This option overrides the $MANPATH environment variable and causes option -m to be ignored. A path specified as a manpath must be the root of a manual page hierarchy structured into sections as described in the man-db manual (under "The manual page system"). To view manual pages outside such hierarchies, see the -l option. -S list, -s list, --sections=list The given list is a colon- or comma-separated list of sections, used to determine which manual sections to search and in what order. This option overrides the $MANSECT environment variable. (The -s spelling is for compatibility with System V.) -e sub-extension, --extension=sub-extension Some systems incorporate large packages of manual pages, such as those that accompany the Tcl package, into the main manual page hierarchy. To get around the problem of having two manual pages with the same name such as exit(3), the Tcl pages were usually all assigned to section l. As this is unfortunate, it is now possible to put the pages in the correct section, and to assign a specific "extension" to them, in this case, exit(3tcl). Under normal operation, man will display exit(3) in preference to exit(3tcl). To negotiate this situation and to avoid having to know which section the page you require resides in, it is now possible to give man a sub-extension string indicating which package the page must belong to. Using the above example, supplying the option -e tcl to man will restrict the search to pages having an extension of *tcl. -i, --ignore-case Ignore case when searching for manual pages. This is the default. -I, --match-case Search for manual pages case-sensitively. --regex Show all pages with any part of either their names or their descriptions matching each page argument as a regular expression, as with apropos(1). Since there is usually no reasonable way to pick a "best" page when searching for a regular expression, this option implies -a. --wildcard Show all pages with any part of either their names or their descriptions matching each page argument using shell-style wildcards, as with apropos(1) --wildcard. The page argument must match the entire name or description, or match on word boundaries in the description. Since there is usually no reasonable way to pick a "best" page when searching for a wildcard, this option implies -a. --names-only If the --regex or --wildcard option is used, match only page names, not page descriptions, as with whatis(1). Otherwise, no effect. -a, --all By default, man will exit after displaying the most suitable manual page it finds. Using this option forces man to display all the manual pages with names that match the search criteria. -u, --update This option causes man to update its database caches of installed manual pages. This is only needed in rare situations, and it is normally better to run mandb(8) instead. --no-subpages By default, man will try to interpret pairs of manual page names given on the command line as equivalent to a single manual page name containing a hyphen or an underscore. This supports the common pattern of programs that implement a number of subcommands, allowing them to provide manual pages for each that can be accessed using similar syntax as would be used to invoke the subcommands themselves. For example: $ man -aw git diff /usr/share/man/man1/git-diff.1.gz To disable this behaviour, use the --no-subpages option. $ man -aw --no-subpages git diff /usr/share/man/man1/git.1.gz /usr/share/man/man3/Git.3pm.gz /usr/share/man/man1/diff.1.gz Controlling formatted output -P pager, --pager=pager Specify which output pager to use. By default, man uses less, falling back to cat if less is not found or is not executable. This option overrides the $MANPAGER environment variable, which in turn overrides the $PAGER environment variable. It is not used in conjunction with -f or -k. The value may be a simple command name or a command with arguments, and may use shell quoting (backslashes, single quotes, or double quotes). It may not use pipes to connect multiple commands; if you need that, use a wrapper script, which may take the file to display either as an argument or on standard input. -r prompt, --prompt=prompt If a recent version of less is used as the pager, man will attempt to set its prompt and some sensible options. The default prompt looks like Manual page name(sec) line x where name denotes the manual page name, sec denotes the section it was found under and x the current line number. This is achieved by using the $LESS environment variable. Supplying -r with a string will override this default. The string may contain the text $MAN_PN which will be expanded to the name of the current manual page and its section name surrounded by "(" and ")". The string used to produce the default could be expressed as \ Manual\ page\ \$MAN_PN\ ?ltline\ %lt?L/%L.: byte\ %bB?s/%s..?\ (END):?pB\ %pB\\%.. (press h for help or q to quit) It is broken into three lines here for the sake of readability only. For its meaning see the less(1) manual page. The prompt string is first evaluated by the shell. All double quotes, back-quotes and backslashes in the prompt must be escaped by a preceding backslash. The prompt string may end in an escaped $ which may be followed by further options for less. By default man sets the -ix8 options. The $MANLESS environment variable described below may be used to set a default prompt string if none is supplied on the command line. -7, --ascii When viewing a pure ascii(7) manual page on a 7 bit terminal or terminal emulator, some characters may not display correctly when using the latin1(7) device description with GNU nroff. This option allows pure ascii manual pages to be displayed in ascii with the latin1 device. It will not translate any latin1 text. The following table shows the translations performed: some parts of it may only be displayed properly when using GNU nroff's latin1(7) device. Description Octal latin1 ascii ──────────────────────────────────────── continuation 255 ‐ - hyphen bullet (middle 267 • o dot) acute accent 264 ´ ' multiplication 327 × x sign If the latin1 column displays correctly, your terminal may be set up for latin1 characters and this option is not necessary. If the latin1 and ascii columns are identical, you are reading this page using this option or man did not format this page using the latin1 device description. If the latin1 column is missing or corrupt, you may need to view manual pages with this option. This option is ignored when using options -t, -H, -T, or -Z and may be useless for nroff other than GNU's. -E encoding, --encoding=encoding Generate output for a character encoding other than the default. For backward compatibility, encoding may be an nroff device such as ascii, latin1, or utf8 as well as a true character encoding such as UTF-8. --no-hyphenation, --nh Normally, nroff will automatically hyphenate text at line breaks even in words that do not contain hyphens, if it is necessary to do so to lay out words on a line without excessive spacing. This option disables automatic hyphenation, so words will only be hyphenated if they already contain hyphens. If you are writing a manual page and simply want to prevent nroff from hyphenating a word at an inappropriate point, do not use this option, but consult the nroff documentation instead; for instance, you can put "\%" inside a word to indicate that it may be hyphenated at that point, or put "\%" at the start of a word to prevent it from being hyphenated. --no-justification, --nj Normally, nroff will automatically justify text to both margins. This option disables full justification, leaving justified only to the left margin, sometimes called "ragged-right" text. If you are writing a manual page and simply want to prevent nroff from justifying certain paragraphs, do not use this option, but consult the nroff documentation instead; for instance, you can use the ".na", ".nf", ".fi", and ".ad" requests to temporarily disable adjusting and filling. -p string, --preprocessor=string Specify the sequence of preprocessors to run before nroff or troff/groff. Not all installations will have a full set of preprocessors. Some of the preprocessors and the letters used to designate them are: eqn (e), grap (g), pic (p), tbl (t), vgrind (v), refer (r). This option overrides the $MANROFFSEQ environment variable. zsoelim is always run as the very first preprocessor. -t, --troff Use groff -mandoc to format the manual page to stdout. This option is not required in conjunction with -H, -T, or -Z. -T[device], --troff-device[=device] This option is used to change groff (or possibly troff's) output to be suitable for a device other than the default. It implies -t. Examples (provided with Groff-1.17) include dvi, latin1, ps, utf8, X75 and X100. -H[browser], --html[=browser] This option will cause groff to produce HTML output, and will display that output in a web browser. The choice of browser is determined by the optional browser argument if one is provided, by the $BROWSER environment variable, or by a compile-time default if that is unset (usually lynx). This option implies -t, and will only work with GNU troff. -X[dpi], --gxditview[=dpi] This option displays the output of groff in a graphical window using the gxditview program. The dpi (dots per inch) may be 75, 75-12, 100, or 100-12, defaulting to 75; the -12 variants use a 12-point base font. This option implies -T with the X75, X75-12, X100, or X100-12 device respectively. -Z, --ditroff groff will run troff and then use an appropriate post- processor to produce output suitable for the chosen device. If groff -mandoc is groff, this option is passed to groff and will suppress the use of a post-processor. It implies -t. Getting help -?, --help Print a help message and exit. --usage Print a short usage message and exit. -V, --version Display version information.
0 Successful program execution. 1 Usage, syntax or configuration file error. 2 Operational error. 3 A child process returned a non-zero exit status. 16 At least one of the pages/files/keywords didn't exist or wasn't matched.
MANPATH If $MANPATH is set, its value is used as the path to search for manual pages. MANROFFOPT Every time man invokes the formatter (nroff, troff, or groff), it adds the contents of $MANROFFOPT to the formatter's command line. MANROFFSEQ If $MANROFFSEQ is set, its value is used to determine the set of preprocessors to pass each manual page through. The default preprocessor list is system dependent. MANSECT If $MANSECT is set, its value is a colon-delimited list of sections and it is used to determine which manual sections to search and in what order. The default is "1 n l 8 3 0 2 5 4 9 6 7", unless overridden by the SECTION directive in /usr/local/etc/man_db.conf. MANPAGER, PAGER If $MANPAGER or $PAGER is set ($MANPAGER is used in preference), its value is used as the name of the program used to display the manual page. By default, less is used, falling back to cat if less is not found or is not executable. The value may be a simple command name or a command with arguments, and may use shell quoting (backslashes, single quotes, or double quotes). It may not use pipes to connect multiple commands; if you need that, use a wrapper script, which may take the file to display either as an argument or on standard input. MANLESS If $MANLESS is set, its value will be used as the default prompt string for the less pager, as if it had been passed using the -r option (so any occurrences of the text $MAN_PN will be expanded in the same way). For example, if you want to set the prompt string unconditionally to “my prompt string”, set $MANLESS to ‘-Psmy prompt string’. Using the -r option overrides this environment variable. BROWSER If $BROWSER is set, its value is a colon-delimited list of commands, each of which in turn is used to try to start a web browser for man --html. In each command, %s is replaced by a filename containing the HTML output from groff, %% is replaced by a single percent sign (%), and %c is replaced by a colon (:). SYSTEM If $SYSTEM is set, it will have the same effect as if it had been specified as the argument to the -m option. MANOPT If $MANOPT is set, it will be parsed prior to man's command line and is expected to be in a similar format. As all of the other man specific environment variables can be expressed as command line options, and are thus candidates for being included in $MANOPT it is expected that they will become obsolete. N.B. All spaces that should be interpreted as part of an option's argument must be escaped. MANWIDTH If $MANWIDTH is set, its value is used as the line length for which manual pages should be formatted. If it is not set, manual pages will be formatted with a line length appropriate to the current terminal (using the value of $COLUMNS, and ioctl(2) if available, or falling back to 80 characters if neither is available). Cat pages will only be saved when the default formatting can be used, that is when the terminal line length is between 66 and 80 characters. MAN_KEEP_FORMATTING Normally, when output is not being directed to a terminal (such as to a file or a pipe), formatting characters are discarded to make it easier to read the result without special tools. However, if $MAN_KEEP_FORMATTING is set to any non-empty value, these formatting characters are retained. This may be useful for wrappers around man that can interpret formatting characters. MAN_KEEP_STDERR Normally, when output is being directed to a terminal (usually to a pager), any error output from the command used to produce formatted versions of manual pages is discarded to avoid interfering with the pager's display. Programs such as groff often produce relatively minor error messages about typographical problems such as poor alignment, which are unsightly and generally confusing when displayed along with the manual page. However, some users want to see them anyway, so, if $MAN_KEEP_STDERR is set to any non-empty value, error output will be displayed as usual. LANG, LC_MESSAGES Depending on system and implementation, either or both of $LANG and $LC_MESSAGES will be interrogated for the current message locale. man will display its messages in that locale (if available). See setlocale(3) for precise details.
/usr/local/etc/man_db.conf man-db configuration file. /usr/share/man A global manual page hierarchy.
apropos(1), groff(1), less(1), manpath(1), nroff(1), troff(1), whatis(1), zsoelim(1), manpath(5), man(7), catman(8), mandb(8) Documentation for some packages may be available in other formats, such as info(1) or HTML.
1990, 1991 – Originally written by John W. Eaton (email@example.com). Dec 23 1992: Rik Faith (firstname.lastname@example.org) applied bug fixes supplied by Willem Kasdorp (email@example.com). 30th April 1994 – 23rd February 2000: Wilf. (G.Wilford@ee.surrey.ac.uk) has been developing and maintaining this package with the help of a few dedicated people. 30th October 1996 – 30th March 2001: Fabrizio Polacco <firstname.lastname@example.org> maintained and enhanced this package for the Debian project, with the help of all the community. 31st March 2001 – present day: Colin Watson <email@example.com> is now developing and maintaining man-db.
This page is part of the man-db (manual pager suite) project. Information about the project can be found at ⟨http://www.nongnu.org/man-db/⟩. If you have a bug report for this manual page, send it to firstname.lastname@example.org. This page was obtained from the project's upstream Git repository ⟨https://git.savannah.gnu.org/r/man-db.git⟩ on 2021-08-27. (At that time, the date of the most recent commit that was found in the repository was 2021-07-11.) If you discover any rendering problems in this HTML version of the page, or you believe there is a better or more up-to-date source for the page, or you have corrections or improvements to the information in this COLOPHON (which is not part of the original manual page), send a mail to email@example.com 2.9.4 2021-02-08 MAN(1)
Pages that refer to this page: apropos(1), git(1), groff(1), groffer(1), grotty(1), intro(1), lexgrog(1), manconv(1), manpath(1), man-recode(1), systemd-analyze(1), ul(1), whatis(1), zsoelim(1), manpath(5), environ(7), groff_char(7), groff_man(7), groff_man_style(7), man(7), man-pages(7), catman(8), mandb(8)