|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|
|
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | DATA REDUCTION | CAVEATS | DIAGNOSTICS | FILES | PCP ENVIRONMENT | SEE ALSO | COLOPHON |
|
|
|
PMLOGREDUCE(1) General Commands Manual PMLOGREDUCE(1)
pmlogreduce - temporal reduction of Performance Co-Pilot archives
pmlogreduce [-z?] [-A align] [-s samples] [-S starttime] [-t
interval] [-T endtime] [-v volsamples] [-Z timezone] input output
pmlogreduce reads one set of Performance Co-Pilot (PCP) archives
identified by input and creates a temporally reduced PCP archive
in output. input is a comma-separated list of names, each of
which may be the base name of an archive or the name of a
directory containing one or more archives. The data reduction
involves statistical and temporal reduction of samples with an
output sampling interval defined by the -t option in the output
archive (independent of the sampling intervals in the input
archives), and is further controlled by other command line
arguments.
For some metrics, temporal data reduction is not going to be
helpful, so for metrics with types PM_TYPE_AGGREGATE or
PM_TYPE_EVENT, a warning is issued if these metrics are found in
input and they will be skipped and not appear in the output
archive.
The available command line options are:
-A align, --align=align
Specify a ``natural'' alignment of the output sample times;
refer to PCPIntro(1).
-s samples, --samples=samples
The argument samples defines the number of samples to be
written to output. If samples is 0 or -s is not specified,
pmlogreduce will sample until the end of the set of PCP
archives, or the end of the time window as specified by -T,
whichever comes first. The -s option will override the -T
option if it occurs sooner.
-S starttime, --start=starttime
Define the start of a time window to restrict the samples
retrieved from the input archives; refer to PCPIntro(1).
-t interval, --interval=interval
Consecutive samples in the output archive will appear with a
time delta defined by interval; refer to PCPIntro(1). Note
the default value is 600 (seconds, i.e. 10 minutes).
-T endtime, --finish=endtime
Define the termination of a time window to restrict the
samples retrieved from the input archives; refer to
PCPIntro(1).
-v volsamples
The output archive is potentially a multi-volume data set,
and the -v option causes pmlogreduce to start a new volume
after volsamples records have been written to the output
archive.
Independent of any -v option, each volume of an archive is
limited to no more than 2^31 bytes, so pmlogreduce will
automatically create a new volume for the archive before
this limit is reached.
-z, --hostzone
Use the local timezone of the host from the input archives
when displaying the date and time, or interpreting the -S
and -T options. The default is to initially use the
timezone of the local host.
-Z timezone, --timezone=timezone
Use timezone when displaying the date and time, or
interpreting the -S and -T options. Timezone is in the
format of the environment variable TZ as described in
environ(7).
-?, --help
Display usage message and exit.
The statistical and temporal reduction follows the following
rules:
1. Consecutive records from input are read without
interpolation, and at most one output record is written for
each interval, summarizing the performance data over that
period.
2. If the semantics of a metric indicates it is instantaneous or
discrete then output value is computed as the arithmetic mean
of the observations (if any) over each interval.
3. If the semantics of a metric indicates it is a counter then
the following transformations are applied:
a) Metrics with 32-bit precision are promoted to 64-bit
precision.
b) Any counter wrap (overflow) is noted, and appropriate
adjustment made in the value of the metric over each
interval. This will be correct in the case of a single
counter wrap, but will silently underestimate in the case
where more than one counter wrap occurs between
consecutive observations in the input archives, and
silently overestimate in the case where a counter reset
occurs between consecutive observations in the input
archives; unfortunately these situations cannot be
detected, but are believed to be rare events for the sort
of production monitoring environments where pmlogreduce
is most likely to be deployed.
4. Any changes in instance domains, and indeed all metadata, is
preserved.
5. Any ``mark'' records in the input archives (as created by
pmlogextract(1)) will be preserved in the output archive, so
periods where no data is available are maintained, and data
interpolation will not occur across these periods when the
output archive is subsequently processed with PCP
applications.
The preamble metrics (pmcd.pmlogger.archive, pmcd.pmlogger.host,
and pmcd.pmlogger.port), which are automatically recorded by
pmlogger at the start of the archive, may not be present in the
archive output by pmlogreduce. These metrics are only relevant
while the archive is being created, and have no significance once
recording has finished.
All error conditions detected by pmlogreduce are reported on
stderr with textual (if sometimes terse) explanation.
Should the input archives be corrupted (this can happen if the
pmlogger instance writing the archive suddenly dies), then
pmlogreduce will detect and report the position of the corruption
in the file, and any subsequent information from the input
archives will not be processed.
If any error is detected, pmlogreduce will exit with a non-zero
status.
For each of the input and output archives, several physical files
are used.
archive.meta
metadata (metric descriptions, instance domains, etc.) for
the archive
archive.0
initial volume of metrics values (subsequent volumes have
suffixes 1, 2, ...) - for input these files may have been
previously compressed with bzip2(1) or gzip(1) and thus may
have an additional .bz2 or .gz suffix.
archive.index
temporal index to support rapid random access to the other
files in the archive.
Environment variables with the prefix PCP_ are used to
parameterize the file and directory names used by PCP. On each
installation, the file /etc/pcp.conf contains the local values
for these variables. The $PCP_CONF variable may be used to
specify an alternative configuration file, as described in
pcp.conf(5).
PCPIntro(1), pmlc(1), pmlogdump(1), pmlogextract(1), pmlogger(1),
pcp.conf(5) and pcp.env(5).
This page is part of the PCP (Performance Co-Pilot) project.
Information about the project can be found at
⟨http://www.pcp.io/⟩. If you have a bug report for this manual
page, send it to pcp@groups.io. This page was obtained from the
project's upstream Git repository
⟨https://github.com/performancecopilot/pcp.git⟩ on 2024-06-14.
(At that time, the date of the most recent commit that was found
in the repository was 2024-06-14.) If you discover any rendering
problems in this HTML version of the page, or you believe there
is a better or more up-to-date source for the page, or you have
corrections or improvements to the information in this COLOPHON
(which is not part of the original manual page), send a mail to
man-pages@man7.org
Performance Co-Pilot PCP PMLOGREDUCE(1)
Pages that refer to this page: pmlogextract(1), pmlogrewrite(1), LOGARCHIVE(5)
|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|