|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|
|
NAME | SYNOPSIS | DESCRIPTION | RETURN VALUE | PORTABILITY | BUGS | SEE ALSO | COLOPHON |
|
|
|
curs_mouse(3X) curs_mouse(3X)
has_mouse, getmouse, ungetmouse, mousemask, wenclose,
mouse_trafo, wmouse_trafo, mouseinterval - mouse interface
through curses
#include <curses.h>
typedef unsigned long mmask_t;
typedef struct {
short id; /* ID to distinguish multiple devices */
int x, y, z; /* event coordinates */
mmask_t bstate; /* button state bits */
} MEVENT;
bool has_mouse(void);
int getmouse(MEVENT *event);
int ungetmouse(MEVENT *event);
mmask_t mousemask(mmask_t newmask, mmask_t *oldmask);
bool wenclose(const WINDOW *win, int y, int x);
bool mouse_trafo(int* pY, int* pX, bool to_screen);
bool wmouse_trafo(const WINDOW* win,
int* pY, int* pX, bool to_screen);
int mouseinterval(int erval);
These functions provide an interface to mouse events from ncurs‐
es(3X). Mouse events are represented by KEY_MOUSE pseudo-key
values in the wgetch(3X) input stream.
mousemask
To make mouse events visible, use the mousemask function. This
sets the mouse events to be reported. By default, no mouse
events are reported.
• The function returns an updated copy of newmask to indicate
which of the specified mouse events can be reported.
If the screen has not been initialized, or if the terminal
does not support mouse-events, this function returns 0.
• If oldmask is non-NULL, this function fills the indicated lo‐
cation with the previous value of the current screen's mouse
event mask.
As a side effect, setting a zero mousemask may turn off the mouse
pointer; setting a nonzero mask may turn it on. Whether this
happens is device-dependent.
Mouse events
Here are the mouse event type masks which may be defined:
Name Description
─────────────────────────────────────────────────────────────────────
BUTTON1_PRESSED mouse button 1 down
BUTTON1_RELEASED mouse button 1 up
BUTTON1_CLICKED mouse button 1 clicked
BUTTON1_DOUBLE_CLICKED mouse button 1 double clicked
BUTTON1_TRIPLE_CLICKED mouse button 1 triple clicked
─────────────────────────────────────────────────────────────────────
BUTTON2_PRESSED mouse button 2 down
BUTTON2_RELEASED mouse button 2 up
BUTTON2_CLICKED mouse button 2 clicked
BUTTON2_DOUBLE_CLICKED mouse button 2 double clicked
BUTTON2_TRIPLE_CLICKED mouse button 2 triple clicked
─────────────────────────────────────────────────────────────────────
BUTTON3_PRESSED mouse button 3 down
BUTTON3_RELEASED mouse button 3 up
BUTTON3_CLICKED mouse button 3 clicked
BUTTON3_DOUBLE_CLICKED mouse button 3 double clicked
BUTTON3_TRIPLE_CLICKED mouse button 3 triple clicked
─────────────────────────────────────────────────────────────────────
BUTTON4_PRESSED mouse button 4 down
BUTTON4_RELEASED mouse button 4 up
BUTTON4_CLICKED mouse button 4 clicked
BUTTON4_DOUBLE_CLICKED mouse button 4 double clicked
BUTTON4_TRIPLE_CLICKED mouse button 4 triple clicked
─────────────────────────────────────────────────────────────────────
BUTTON5_PRESSED mouse button 5 down
BUTTON5_RELEASED mouse button 5 up
BUTTON5_CLICKED mouse button 5 clicked
BUTTON5_DOUBLE_CLICKED mouse button 5 double clicked
BUTTON5_TRIPLE_CLICKED mouse button 5 triple clicked
─────────────────────────────────────────────────────────────────────
BUTTON_SHIFT shift was down during button state change
BUTTON_CTRL control was down during button state change
BUTTON_ALT alt was down during button state change
ALL_MOUSE_EVENTS report all button state changes
REPORT_MOUSE_POSITION report mouse movement
─────────────────────────────────────────────────────────────────────
getmouse
Once a class of mouse events has been made visible in a window,
calling the wgetch function on that window may return KEY_MOUSE
as an indicator that a mouse event has been queued. To read the
event data and pop the event off the queue, call getmouse. This
function will return OK if a mouse event is actually visible in
the given window, ERR otherwise. When getmouse returns OK, the
data deposited as y and x in the event structure coordinates will
be screen-relative character-cell coordinates. The returned
state mask will have exactly one bit set to indicate the event
type. The corresponding data in the queue is marked invalid. A
subsequent call to getmouse will retrieve the next older item
from the queue.
ungetmouse
The ungetmouse function behaves analogously to ungetch. It push‐
es a KEY_MOUSE event onto the input queue, and associates with
that event the given state data and screen-relative character-
cell coordinates.
wenclose
The wenclose function tests whether a given pair of screen-rela‐
tive character-cell coordinates is enclosed by a given window,
returning TRUE if it is and FALSE otherwise. It is useful for
determining what subset of the screen windows enclose the loca‐
tion of a mouse event.
wmouse_trafo
The wmouse_trafo function transforms a given pair of coordinates
from stdscr-relative coordinates to coordinates relative to the
given window or vice versa. The resulting stdscr-relative coor‐
dinates are not always identical to window-relative coordinates
due to the mechanism to reserve lines on top or bottom of the
screen for other purposes (see the ripoffline and slk_init(3X)
calls, for example).
• If the parameter to_screen is TRUE, the pointers pY, pX must
reference the coordinates of a location inside the window
win. They are converted to window-relative coordinates and
returned through the pointers. If the conversion was suc‐
cessful, the function returns TRUE.
• If one of the parameters was NULL or the location is not in‐
side the window, FALSE is returned.
• If to_screen is FALSE, the pointers pY, pX must reference
window-relative coordinates. They are converted to stdscr-
relative coordinates if the window win encloses this point.
In this case the function returns TRUE.
• If one of the parameters is NULL or the point is not inside
the window, FALSE is returned. The referenced coordinates
are only replaced by the converted coordinates if the trans‐
formation was successful.
mouse_trafo
The mouse_trafo function performs the same translation as
wmouse_trafo, using stdscr for win.
mouseinterval
The mouseinterval function sets the maximum time (in thousands of
a second) that can elapse between press and release events for
them to be recognized as a click. Use mouseinterval(0) to dis‐
able click resolution. This function returns the previous inter‐
val value. Use mouseinterval(-1) to obtain the interval without
altering it. The default is one sixth of a second.
has_mouse
The has_mouse function returns TRUE if the mouse driver has been
successfully initialized.
Note that mouse events will be ignored when input is in cooked
mode, and will cause an error beep when cooked mode is being sim‐
ulated in a window by a function such as getstr that expects a
linefeed for input-loop termination.
getmouse and ungetmouse return the integer ERR upon failure or OK
upon successful completion:
getmouse
returns an error.
• If no mouse driver was initialized, or if the mask parame‐
ter is zero,
• It returns an error if a mouse event was detected which
did not match the current mousemask.
• It also returns an error if no more events remain in the
queue.
ungetmouse
returns an error if the FIFO is full.
mousemask returns the mask of reportable events.
mouseinterval returns the previous interval value, unless the
terminal was not initialized. In that case, it returns the maxi‐
mum interval value (166).
wenclose and wmouse_trafo are boolean functions returning TRUE or
FALSE depending on their test result.
These calls were designed for ncurses(3X), and are not found in
SVr4 curses, 4.4BSD curses, or any other previous version of
curses.
SVr4 curses had support for the mouse in a variant of xterm(1).
It is mentioned in a few places, but with no supporting documen‐
tation:
• the “libcurses” manual page lists functions for this feature
which are prototyped in curses.h:
extern int mouse_set(long int);
extern int mouse_on(long int);
extern int mouse_off(long int);
extern int request_mouse_pos(void);
extern int map_button(unsigned long);
extern void wmouse_position(WINDOW *, int *, int *);
extern unsigned long getmouse(void), getbmap(void);
• the “terminfo” manual page lists capabilities for the feature
buttons btns BT Number of buttons on the mouse
get_mouse getm Gm Curses should get button events
key_mouse kmous Km 0631, Mouse event has occurred
mouse_info minfo Mi Mouse status information
req_mouse_pos reqmp RQ Request mouse position report
• the interface made assumptions (as does ncurses) about the
escape sequences sent to and received from the terminal.
For instance the SVr4 curses library used the get_mouse capa‐
bility to tell the terminal which mouse button events it
should send, passing the mouse-button bit-mask to the termi‐
nal. Also, it could ask the terminal where the mouse was us‐
ing the req_mouse_pos capability.
Those features required a terminal which had been modified to
work with curses. They were not part of the X Consortium's
xterm.
When developing the xterm mouse support for ncurses in September
1995, Eric Raymond was uninterested in using the same interface
due to its lack of documentation. Later, in 1998, Mark Hesseling
provided support in PDCurses 2.3 using the SVr4 interface. PD‐
Curses, however, does not use video terminals, making it unneces‐
sary to be concerned about compatibility with the escape se‐
quences.
The feature macro NCURSES_MOUSE_VERSION is provided so the pre‐
processor can be used to test whether these features are present.
If the interface is changed, the value of NCURSES_MOUSE_VERSION
will be incremented. These values for NCURSES_MOUSE_VERSION may
be specified when configuring ncurses:
1 has definitions for reserved events. The mask uses 28
bits.
2 adds definitions for button 5, removes the definitions for
reserved events. The mask uses 29 bits.
The order of the MEVENT structure members is not guaranteed. Ad‐
ditional fields may be added to the structure in the future.
Under ncurses(3X), these calls are implemented using either
xterm's built-in mouse-tracking API or platform-specific drivers
including
• Alessandro Rubini's gpm server
• FreeBSD sysmouse
• OS/2 EMX
If you are using an unsupported configuration, mouse events will
not be visible to ncurses(3X) (and the mousemask function will
always return 0).
If the terminfo entry contains a XM string, this is used in the
xterm mouse driver to control the way the terminal is initialized
for mouse operation. The default, if XM is not found, corre‐
sponds to private mode 1000 of xterm:
\E[?1000%?%p1%{1}%=%th%el%;
The mouse driver also recognizes a newer xterm private mode 1006,
e.g.,
\E[?1006;1000%?%p1%{1}%=%th%el%;
The z member in the event structure is not presently used. It is
intended for use with touch screens (which may be pressure-sensi‐
tive) or with 3D-mice/trackballs/power gloves.
The ALL_MOUSE_EVENTS class does not include REPORT_MOUSE_POSI‐
TION. They are distinct. For example, in xterm, wheel/scrolling
mice send position reports as a sequence of presses of buttons 4
or 5 without matching button-releases.
Mouse events under xterm will not in fact be ignored during
cooked mode, if they have been enabled by mousemask. Instead,
the xterm mouse report sequence will appear in the string read.
Mouse events under xterm will not be detected correctly in a win‐
dow with its keypad bit off, since they are interpreted as a va‐
riety of function key. Your terminfo description should have
kmous set to “\E[M” (the beginning of the response from xterm for
mouse clicks). Other values for kmous are permitted, but under
the same assumption, i.e., it is the beginning of the response.
Because there are no standard terminal responses that would serve
to identify terminals which support the xterm mouse protocol,
ncurses assumes that if kmous is defined in the terminal descrip‐
tion, or if the terminal description's primary name or aliases
contain the string “xterm”, then the terminal may send mouse
events. The kmous capability is checked first, allowing the use
of newer xterm mouse protocols such as xterm's private mode 1006.
curses(3X), curs_inopts(3X), curs_kernel(3X), curs_slk(3X),
curs_variables(3X).
This page is part of the ncurses (new curses) project. Informa‐
tion about the project can be found at
⟨https://www.gnu.org/software/ncurses/ncurses.html⟩. If you have
a bug report for this manual page, send it to
bug-ncurses-request@gnu.org. This page was obtained from the
project's upstream Git mirror of the CVS repository
⟨https://github.com/mirror/ncurses.git⟩ on 2024-06-14. (At that
time, the date of the most recent commit that was found in the
repository was 2023-03-12.) If you discover any rendering
problems in this HTML version of the page, or you believe there
is a better or more up-to-date source for the page, or you have
corrections or improvements to the information in this COLOPHON
(which is not part of the original manual page), send a mail to
man-pages@man7.org
curs_mouse(3X)
|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|