systemd.system-credentials(7) — Linux manual page

NAME | DESCRIPTION | WELL KNOWN SYSTEM CREDENTIALS | SEE ALSO | NOTES | COLOPHON

SYSTEMD...EDENTIALS(7) systemd.system-credentials SYSTEMD...EDENTIALS(7)

NAME         top

       systemd.system-credentials - System Credentials

DESCRIPTION         top

       System and Service Credentials[1] are data objects that may be
       passed into booted systems or system services as they are
       invoked. They can be acquired from various external sources, and
       propagated into the system and from there into system services.
       Credentials may optionally be encrypted with a machine-specific
       key and/or locked to the local TPM2 device, and are only
       decrypted when the consuming service is invoked.

       System credentials may be used to provision and configure various
       aspects of the system. Depending on the consuming component
       credentials are only used on initial invocations or are needed
       for all invocations.

       Credentials may be used for any kind of data, binary or text, and
       may carry passwords, secrets, certificates, cryptographic key
       material, identity information, configuration, and more.

WELL KNOWN SYSTEM CREDENTIALS         top

       firstboot.keymap
           The console key mapping to set (e.g.  "de"). Read by
           systemd-firstboot(1), and only honoured if no console keymap
           has been configured before.

           Added in version 252.

       firstboot.locale, firstboot.locale-messages
           The system locale to set (e.g.  "de_DE.UTF-8"). Read by
           systemd-firstboot(1), and only honoured if no locale has been
           configured before.  firstboot.locale sets "LANG", while
           firstboot.locale-message sets "LC_MESSAGES".

           Added in version 252.

       firstboot.timezone
           The system timezone to set (e.g.  "Europe/Berlin"). Read by
           systemd-firstboot(1), and only honoured if no system timezone
           has been configured before.

           Added in version 252.

       login.issue
           The data of this credential is written to
           /etc/issue.d/50-provision.conf, if the file doesn't exist
           yet.  agetty(8) reads this file and shows its contents at the
           login prompt of terminal logins. See issue(5) for details.

           Consumed by /usr/lib/tmpfiles.d/provision.conf, see
           tmpfiles.d(5).

           Added in version 252.

       login.motd
           The data of this credential is written to
           /etc/motd.d/50-provision.conf, if the file doesn't exist yet.
           pam_motd(8) reads this file and shows its contents as
           "message of the day" during terminal logins. See motd(5) for
           details.

           Consumed by /usr/lib/tmpfiles.d/provision.conf, see
           tmpfiles.d(5).

           Added in version 252.

       network.hosts
           The data of this credential is written to /etc/hosts, if the
           file doesn't exist yet. See hosts(5) for details.

           Consumed by /usr/lib/tmpfiles.d/provision.conf, see
           tmpfiles.d(5).

           Added in version 252.

       network.dns, network.search_domains
           DNS server information and search domains. Read by
           systemd-resolved.service(8).

           Added in version 253.

       network.conf.*, network.link.*, network.netdev.*,
       network.network.*
           Configures network devices. Read by
           systemd-network-generator.service(8). These credentials
           should contain valid networkd.conf(5), systemd.link(5),
           systemd.netdev(5), systemd.network(5) configuration data.
           From each matching credential a separate file is created.
           Example: the contents of a credential network.link.50-foobar
           will be copied into a file 50-foobar.link.

           Note that the resulting files are created world-readable,
           it's hence recommended to not include secrets in these
           credentials, but supply them via separate credentials
           directly to systemd-networkd.service, e.g.
           network.wireguard.*  as described below.

           Added in version 256.

       network.wireguard.*
           Configures secrets for WireGuard netdevs. Read by
           systemd-networkd.service(8). For more information, refer to
           the [WireGuard] section of systemd.netdev(5).

           Added in version 256.

       passwd.hashed-password.root, passwd.plaintext-password.root
           May contain the password (either in UNIX hashed format, or in
           plaintext) for the root users. Read by both
           systemd-firstboot(1) and systemd-sysusers(1), and only
           honoured if no root password has been configured before.

           Added in version 252.

       passwd.shell.root
           The path to the shell program (e.g.  "/bin/bash") for the
           root user. Read by both systemd-firstboot(1) and
           systemd-sysusers(1), and only honoured if no root shell has
           been configured before.

           Added in version 252.

       ssh.authorized_keys.root
           The data of this credential is written to
           /root/.ssh/authorized_keys, if the file doesn't exist yet.
           This allows provisioning SSH access for the system's root
           user.

           Consumed by /usr/lib/tmpfiles.d/provision.conf, see
           tmpfiles.d(5).

           Added in version 252.

       ssh.listen
           May be used to configure SSH sockets the system shall be
           reachable on. See systemd-ssh-generator(8) for details.

           Added in version 256.

       sysusers.extra
           Additional sysusers.d(5) lines to process during boot.

           Added in version 252.

       sysctl.extra
           Additional sysctl.d(5) lines to process during boot.

           Added in version 252.

       tmpfiles.extra
           Additional tmpfiles.d(5) lines to process during boot.

           Added in version 252.

       fstab.extra
           Additional mounts to establish at boot. For details, see
           systemd-fstab-generator(8).

           Added in version 254.

       vconsole.keymap, vconsole.keymap_toggle, vconsole.font,
       vconsole.font_map, vconsole.font_unimap
           Console settings to apply, see
           systemd-vconsole-setup.service(8) for details.

           Added in version 253.

       getty.ttys.serial, getty.ttys.container
           Used for spawning additional login prompts, see
           systemd-getty-generator(8) for details.

           Added in version 254.

       journal.forward_to_socket
           Used by systemd-journald(8) to determine where to forward log
           messages for socket forwarding, see journald.conf(5) for
           details.

           Added in version 256.

       journal.storage
           Used by systemd-journald(8) to determine where to store
           journal files, see journald.conf(5) for details.

           Added in version 256.

       vmm.notify_socket
           Configures an sd_notify(3) compatible AF_VSOCK socket the
           service manager will report status information, ready
           notification and exit status on. For details see systemd(1).

           Added in version 253.

       system.machine_id
           Takes a 128bit ID to initialize the machine ID from (if it is
           not set yet). Interpreted by the service manager (PID 1). For
           details see systemd(1).

           Added in version 254.

       system.hostname
           Accepts a (transient) hostname to configure during early
           boot. The static hostname specified in /etc/hostname, if
           configured, takes precedence over this setting. Interpreted
           by the service manager (PID 1). For details see systemd(1).

           Added in version 254.

       home.create.*
           Creates a home area for the specified user with the user
           record data passed in. For details see homectl(1).

           Added in version 256.

       cryptsetup.passphrase, cryptsetup.tpm2-pin, cryptsetup.fido2-pin,
       cryptsetup.pkcs11-pin, cryptsetup.luks2-pin
           Specifies the passphrase/PINs to use for unlock encrypted
           storage volumes. For details see systemd-cryptsetup(8).

           Added in version 256.

       systemd.extra-unit.*, systemd.unit-dropin.*
           These credentials specify extra units and drop-ins to add to
           the system. For details see systemd-debug-generator(8).

           Added in version 256.

       udev.conf.*, udev.rules.*
           Configures udev configuration file and udev rules. Read by
           systemd-udev-load-credentials.service, which invokes udevadm
           control --load-credentials. These credentials directly
           translate to a matching udev.conf(5) or udev(7) rules file.
           Example: the contents of a credential udev.conf.50-foobar
           will be copied into a file
           /run/udev/udev.conf.d/50-foobar.conf, and
           udev.rules.50-foobar will be copied into a file
           /run/udev/rules.d/50-foobar.rules. See udev(7), udev.conf(5),
           and udevadm(8) for details.

           Added in version 256.

SEE ALSO         top

       systemd(1), kernel-command-line(7), smbios-type-11(7)

NOTES         top

        1. System and Service Credentials
           https://systemd.io/CREDENTIALS

COLOPHON         top

       This page is part of the systemd (systemd system and service
       manager) project.  Information about the project can be found at
       ⟨http://www.freedesktop.org/wiki/Software/systemd⟩.  If you have
       a bug report for this manual page, see
       ⟨http://www.freedesktop.org/wiki/Software/systemd/#bugreports⟩.
       This page was obtained from the project's upstream Git repository
       ⟨https://github.com/systemd/systemd.git⟩ on 2024-06-14.  (At that
       time, the date of the most recent commit that was found in the
       repository was 2024-06-13.)  If you discover any rendering
       problems in this HTML version of the page, or you believe there
       is a better or more up-to-date source for the page, or you have
       corrections or improvements to the information in this COLOPHON
       (which is not part of the original manual page), send a mail to
       man-pages@man7.org

systemd 257~devel                                 SYSTEMD...EDENTIALS(7)

Pages that refer to this page: systemd(1)kernel-command-line(7)smbios-type-11(7)systemd.directives(7)systemd.index(7)systemd-getty-generator(8)systemd-ssh-generator(8)