|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|
|
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | REMOVING FILES THAT HAVE DISAPPEARED FROM THE FILESYSTEM | SUBMODULES | EXAMPLES | BUGS | SEE ALSO | GIT | COLOPHON |
|
|
|
GIT-RM(1) Git Manual GIT-RM(1)
git-rm - Remove files from the working tree and from the index
git rm [-f | --force] [-n] [-r] [--cached] [--ignore-unmatch]
[--quiet] [--pathspec-from-file=<file> [--pathspec-file-nul]]
[--] [<pathspec>...]
Remove files matching pathspec from the index, or from the
working tree and the index. git rm will not remove a file from
just your working directory. (There is no option to remove a file
only from the working tree and yet keep it in the index; use
/bin/rm if you want to do that.) The files being removed have to
be identical to the tip of the branch, and no updates to their
contents can be staged in the index, though that default behavior
can be overridden with the -f option. When --cached is given, the
staged content has to match either the tip of the branch or the
file on disk, allowing the file to be removed from just the
index. When sparse-checkouts are in use (see
git-sparse-checkout(1)), git rm will only remove paths within the
sparse-checkout patterns.
<pathspec>...
Files to remove. A leading directory name (e.g. dir to
remove dir/file1 and dir/file2) can be given to remove all
files in the directory, and recursively all sub-directories,
but this requires the -r option to be explicitly given.
The command removes only the paths that are known to Git.
File globbing matches across directory boundaries. Thus,
given two directories d and d2, there is a difference between
using git rm 'd*' and git rm 'd/*', as the former will also
remove all of directory d2.
For more details, see the pathspec entry in gitglossary(7).
-f, --force
Override the up-to-date check.
-n, --dry-run
Don’t actually remove any file(s). Instead, just show if they
exist in the index and would otherwise be removed by the
command.
-r
Allow recursive removal when a leading directory name is
given.
--
This option can be used to separate command-line options from
the list of files, (useful when filenames might be mistaken
for command-line options).
--cached
Use this option to unstage and remove paths only from the
index. Working tree files, whether modified or not, will be
left alone.
--ignore-unmatch
Exit with a zero status even if no files matched.
--sparse
Allow updating index entries outside of the sparse-checkout
cone. Normally, git rm refuses to update index entries whose
paths do not fit within the sparse-checkout cone. See
git-sparse-checkout(1) for more.
-q, --quiet
git rm normally outputs one line (in the form of an rm
command) for each file removed. This option suppresses that
output.
--pathspec-from-file=<file>
Pathspec is passed in <file> instead of commandline args. If
<file> is exactly - then standard input is used. Pathspec
elements are separated by LF or CR/LF. Pathspec elements can
be quoted as explained for the configuration variable
core.quotePath (see git-config(1)). See also
--pathspec-file-nul and global --literal-pathspecs.
--pathspec-file-nul
Only meaningful with --pathspec-from-file. Pathspec elements
are separated with NUL character and all other characters are
taken literally (including newlines and quotes).
There is no option for git rm to remove from the index only the
paths that have disappeared from the filesystem. However,
depending on the use case, there are several ways that can be
done.
Using “git commit -a”
If you intend that your next commit should record all
modifications of tracked files in the working tree and record all
removals of files that have been removed from the working tree
with rm (as opposed to git rm), use git commit -a, as it will
automatically notice and record all removals. You can also have a
similar effect without committing by using git add -u.
Using “git add -A”
When accepting a new code drop for a vendor branch, you probably
want to record both the removal of paths and additions of new
paths as well as modifications of existing paths.
Typically you would first remove all tracked files from the
working tree using this command:
git ls-files -z | xargs -0 rm -f
and then untar the new code in the working tree. Alternately you
could rsync the changes into the working tree.
After that, the easiest way to record all removals, additions,
and modifications in the working tree is:
git add -A
See git-add(1).
Other ways
If all you really want to do is to remove from the index the
files that are no longer present in the working tree (perhaps
because your working tree is dirty so that you cannot use git
commit -a), use the following command:
git diff --name-only --diff-filter=D -z | xargs -0 git rm --cached
Only submodules using a gitfile (which means they were cloned
with a Git version 1.7.8 or newer) will be removed from the work
tree, as their repository lives inside the .git directory of the
superproject. If a submodule (or one of those nested inside it)
still uses a .git directory, git rm will move the submodules git
directory into the superprojects git directory to protect the
submodule’s history. If it exists the submodule.<name> section in
the gitmodules(5) file will also be removed and that file will be
staged (unless --cached or -n are used).
A submodule is considered up to date when the HEAD is the same as
recorded in the index, no tracked files are modified and no
untracked files that aren’t ignored are present in the
submodule’s work tree. Ignored files are deemed expendable and
won’t stop a submodule’s work tree from being removed.
If you only want to remove the local checkout of a submodule from
your work tree without committing the removal, use
git-submodule(1) deinit instead. Also see gitsubmodules(7) for
details on submodule removal.
git rm Documentation/\*.txt
Removes all *.txt files from the index that are under the
Documentation directory and any of its subdirectories.
Note that the asterisk * is quoted from the shell in this
example; this lets Git, and not the shell, expand the
pathnames of files and subdirectories under the
Documentation/ directory.
git rm -f git-*.sh
Because this example lets the shell expand the asterisk (i.e.
you are listing the files explicitly), it does not remove
subdir/git-foo.sh.
Each time a superproject update removes a populated submodule
(e.g. when switching between commits before and after the
removal) a stale submodule checkout will remain in the old
location. Removing the old directory is only safe when it uses a
gitfile, as otherwise the history of the submodule will be
deleted too. This step will be obsolete when recursive submodule
update has been implemented.
git-add(1)
Part of the git(1) suite
This page is part of the git (Git distributed version control
system) project. Information about the project can be found at
⟨http://git-scm.com/⟩. If you have a bug report for this manual
page, see ⟨http://git-scm.com/community⟩. This page was obtained
from the project's upstream Git repository
⟨https://github.com/git/git.git⟩ on 2024-06-14. (At that time,
the date of the most recent commit that was found in the
repository was 2024-06-12.) If you discover any rendering
problems in this HTML version of the page, or you believe there
is a better or more up-to-date source for the page, or you have
corrections or improvements to the information in this COLOPHON
(which is not part of the original manual page), send a mail to
man-pages@man7.org
Git 2.45.2.492.gd63586 2024-06-12 GIT-RM(1)
Pages that refer to this page: git(1), git-add(1), git-commit(1), git-config(1), git-merge(1), git-submodule(1), gitignore(5)
|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|