VGIMPORTDEVICES(8) System Manager's Manual VGIMPORTDEVICES(8)
vgimportdevices — Add devices for a VG to the devices file.
vgimportdevices option_args position_args [ option_args ]
vgimportdevices adds PVs from a VG to the devices file. This is similar to using using lvmdevices --adddev to add each PV to the devices file individually. vgimportdevices will also update the VG metadata to include the device IDs of each PV. vgimportdevices will create a new devices file if none exists. When a devices file is used, the regex filter is ignored, except in the case of vgimportdevices which will apply the regex filter when looking for the VGs to import to the devices file. Use vgimportdevices -a to import all VGs on a system to the devices file.
Add devices from specific VGs to the devices file. vgimportdevices VG|Tag|Select ... [ -S|--select String ] [ COMMON_OPTIONS ] Add devices from all accessible VGs to the devices file. vgimportdevices -a|--all [ COMMON_OPTIONS ] Common options for command: [ --foreign ] [ --reportformat basic|json ] Common options for lvm: [ -d|--debug ] [ -h|--help ] [ -q|--quiet ] [ -t|--test ] [ -v|--verbose ] [ -y|--yes ] [ --commandprofile String ] [ --config String ] [ --devices PV ] [ --devicesfile String ] [ --driverloaded y|n ] [ --lockopt String ] [ --longhelp ] [ --nolocking ] [ --profile String ] [ --version ]
-a|--all --commandprofile String The command profile to use for command configuration. See lvm.conf(5) for more information about profiles. --config String Config settings for the command. These override lvm.conf(5) settings. The String arg uses the same format as lvm.conf(5), or may use section/field syntax. See lvm.conf(5) for more information about config. -d|--debug ... Set debug level. Repeat from 1 to 6 times to increase the detail of messages sent to the log file and/or syslog (if configured). --devices PV Devices that the command can use. This option can be repeated or accepts a comma separated list of devices. This overrides the devices file. --devicesfile String A file listing devices that LVM should use. The file must exist in /etc/lvm/devices/ and is managed with the lvmdevices(8) command. This overrides the lvm.conf(5) devices/devicesfile and devices/use_devicesfile settings. --driverloaded y|n If set to no, the command will not attempt to use device- mapper. For testing and debugging. --foreign Report/display foreign VGs that would otherwise be skipped. See lvmsystemid(7) for more information about foreign VGs. -h|--help Display help text. --lockopt String Used to pass options for special cases to lvmlockd. See lvmlockd(8) for more information. --longhelp Display long help text. --nolocking Disable locking. --profile String An alias for --commandprofile or --metadataprofile, depending on the command. -q|--quiet ... Suppress output and log messages. Overrides --debug and --verbose. Repeat once to also suppress any prompts with answer 'no'. --reportformat basic|json Overrides current output format for reports which is defined globally by the report/output_format setting in lvm.conf(5). basic is the original format with columns and rows. If there is more than one report per command, each report is prefixed with the report name for identification. json produces report output in JSON format. See lvmreport(7) for more information. -S|--select String Select objects for processing and reporting based on specified criteria. The criteria syntax is described by --select help and lvmreport(7). For reporting commands, one row is displayed for each object matching the criteria. See --options help for selectable object fields. Rows can be displayed with an additional "selected" field (-o selected) showing 1 if the row matches the selection and 0 otherwise. For non-reporting commands which process LVM entities, the selection is used to choose items to process. -t|--test Run in test mode. Commands will not update metadata. This is implemented by disabling all metadata writing but nevertheless returning success to the calling function. This may lead to unusual error messages in multi-stage operations if a tool relies on reading back metadata it believes has changed but hasn't. -v|--verbose ... Set verbose level. Repeat from 1 to 4 times to increase the detail of messages sent to stdout and stderr. --version Display version information. -y|--yes Do not prompt for confirmation interactively but always assume the answer yes. Use with extreme caution. (For automatic no, see -qq.)
VG Volume Group name. See lvm(8) for valid names. Tag Tag name. See lvm(8) for information about tag names and using tags in place of a VG, LV or PV. Select Select indicates that a required positional parameter can be omitted if the --select option is used. No arg appears in this position. String See the option description for information about the string content. Size[UNIT] Size is an input number that accepts an optional unit. Input units are always treated as base two values, regardless of capitalization, e.g. 'k' and 'K' both refer to 1024. The default input unit is specified by letter, followed by |UNIT. UNIT represents other possible input units: b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB, m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB. (This should not be confused with the output control --units, where capital letters mean multiple of 1000.)
See lvm(8) for information about environment variables used by lvm. For example, LVM_VG_NAME can generally be substituted for a required VG parameter.
lvm(8), lvm.conf(5), lvmconfig(8), lvmdevices(8), pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8), pvremove(8), pvresize(8), pvs(8), pvscan(8), vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgcreate(8), vgconvert(8), vgdisplay(8), vgexport(8), vgextend(8), vgimport(8), vgimportclone(8), vgimportdevices(8), vgmerge(8), vgmknodes(8), vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8), vgsplit(8), lvcreate(8), lvchange(8), lvconvert(8), lvdisplay(8), lvextend(8), lvreduce(8), lvremove(8), lvrename(8), lvresize(8), lvs(8), lvscan(8), lvm-fullreport(8), lvm-lvpoll(8), lvm2-activation-generator(8), blkdeactivate(8), lvmdump(8), dmeventd(8), lvmpolld(8), lvmlockd(8), lvmlockctl(8), cmirrord(8), lvmdbusd(8), fsadm(8), lvmsystemid(7), lvmreport(7), lvmraid(7), lvmthin(7), lvmcache(7)
This page is part of the lvm2 (Logical Volume Manager 2) project. Information about the project can be found at ⟨http://www.sourceware.org/lvm2/⟩. If you have a bug report for this manual page, see ⟨https://github.com/lvmteam/lvm2/issues⟩. This page was obtained from the tarball https://github.com/lvmteam/lvm2/archive/refs/tags/v2_03_13.tar.gz fetched from ⟨https://github.com/lvmteam/lvm2/releases⟩ on 2021-08-27. If you discover any rendering problems in this HTML version of the page, or you believe there is a better or more up- to-date source for the page, or you have corrections or improvements to the information in this COLOPHON (which is not part of the original manual page), send a mail to email@example.com Red Hat, Inc. LVM TOOLS 2.03.13(2) (2021-08-11) VGIMPORTDEVICES(8)
Pages that refer to this page: lvchange(8), lvconvert(8), lvcreate(8), lvdisplay(8), lvextend(8), lvmconfig(8), lvmdevices(8), lvmdiskscan(8), lvm-fullreport(8), lvm-lvpoll(8), lvreduce(8), lvremove(8), lvrename(8), lvresize(8), lvs(8), lvscan(8), pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8), pvremove(8), pvresize(8), pvs(8), pvscan(8), vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgconvert(8), vgcreate(8), vgdisplay(8), vgexport(8), vgextend(8), vgimport(8), vgimportclone(8), vgimportdevices(8), vgmerge(8), vgmknodes(8), vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8), vgsplit(8)